make menuconfigИ отключаем следующие пункты в этом же порядке, иначе из-за зависимостей отключение может быть заблокировано.
|
$ dmesg usb 1-5: new high speed USB device using ehci_hcd and address 20 usb 1-5: configuration #1 chosen from 1 choice uvcvideo: Found UVC 1.00 device USB 2.0 PC Camera (058f:3881) input: USB 2.0 PC Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input12 |
|
root@OpenWrt:/# opkg install kmod-video-core kmod-video-uvc mjpg-streamer Installing kmod-video-core (2.6.36-1) to root... Downloading ftp://ftp:ftp@192.168.1.9/kmod-video-core_2.6.36-1_brcm47xx.ipk. Installing kmod-i2c-core (2.6.36-1) to root... Downloading ftp://ftp:ftp@192.168.1.9/kmod-i2c-core_2.6.36-1_brcm47xx.ipk. Installing kmod-video-uvc (2.6.36-1) to root... Downloading ftp://ftp:ftp@192.168.1.9/kmod-video-uvc_2.6.36-1_brcm47xx.ipk. Installing mjpg-streamer (r94-1) to root... Downloading ftp://ftp:ftp@192.168.1.9/mjpg-streamer_r94-1_brcm47xx.ipk. Installing libjpeg (6b-1) to root... Downloading ftp://ftp:ftp@192.168.1.9/libjpeg_6b-1_brcm47xx.ipk. Configuring libjpeg. Configuring kmod-i2c-core. Configuring kmod-video-core. Configuring kmod-video-uvc. Configuring mjpg-streamer. |
|
root@OpenWrt:/# ls /dev/v* /dev/video0 |
|
root@OpenWrt:/# mjpg_streamer -i "input_uvc.so -d /dev/video0 -y" -o "output_http.so" MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 5 i: Format............: YUV i: JPEG Quality......: 80 o: www-folder-path...: disabled o: HTTP TCP port.....: 8080 o: username:password.: disabled o: commands..........: enabled |
|
root@OpenWrt:/# opkg update root@OpenWrt:/# opkg install kmod-sound-core kmod-usb-audio madplay Installing kmod-sound-core (2.6.36-1) to root... Downloading ftp://ftp:ftp@192.168.1.9/kmod-sound-core_2.6.36-1_brcm47xx.ipk. Installing kmod-input-core (2.6.36-1) to root... Downloading ftp://ftp:ftp@192.168.1.9/kmod-input-core_2.6.36-1_brcm47xx.ipk. Installing kmod-usb-audio (2.6.36-1) to root... Downloading ftp://ftp:ftp@192.168.1.9/kmod-usb-audio_2.6.36-1_brcm47xx.ipk. Installing madplay (0.15.2b-3) to root... Downloading ftp://ftp:ftp@192.168.1.9/madplay_0.15.2b-3_brcm47xx.ipk. Installing libid3tag (0.15.1b-3) to root... Downloading ftp://ftp:ftp@192.168.1.9/libid3tag_0.15.1b-3_brcm47xx.ipk. Installing zlib (1.2.5-1) to root... Downloading ftp://ftp:ftp@192.168.1.9/zlib_1.2.5-1_brcm47xx.ipk. Installing libmad (0.15.1b-3) to root... Downloading ftp://ftp:ftp@192.168.1.9/libmad_0.15.1b-3_brcm47xx.ipk. Configuring kmod-input-core. Configuring zlib. Configuring libid3tag. Configuring libmad. Configuring madplay. Configuring kmod-sound-core. Configuring kmod-usb-audio. |
|
root@OpenWrt:/# cat /proc/asound/cards 0 [Set ]: USB-Audio - USB Headphone Set USB Headphone Set at usb-ssb0:1-1.3, full speed |
| root@OpenWrt:/# madplay /home/song.mp3 |
| $ telnet 192.168.1.1 |
| # fdisk -l (у меня Flash-диск определился как /dev/sda) |
|
# fdisk /dev/sda Command (m for help): d Partition number (1-4): 1 Command (m for help): d Partition number (1-4): 2 Command (m for help): d Partition number (1-4): 3 Command (m for help): d No partition is defined yet! |
|
Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 1 First cylinder (1-122, default 1): Using default value 1 Last cylinder or +size or +sizeM or +sizeK (1-122, default 122): +64M Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 2 First cylinder (10-122, default 10): Using default value 10 Last cylinder or +size or +sizeM or +sizeK (10-122, default 122): +128M Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 3 First cylinder (27-122, default 27): Using default value 27 Last cylinder or +size or +sizeM or +sizeK (27-122, default 122): Using default value 122 |
|
Command (m for help): p Disk /dev/sda: 1010 MB, 1010826752 bytes 255 heads, 63 sectors/track, 122 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x91f72d24 Device Boot Start End Blocks Id System /dev/sda1 1 9 72261 83 Linux /dev/sda2 10 26 136552+ 83 Linux /dev/sda3 27 122 771120 83 Linux |
|
Command (m for help): t Partition number (1-4): 1 Hex code (type L to list codes): 82 Changed system type of partition 1 to 82 (Linux swap / Solaris) Command (m for help): p Disk /dev/sda: 1010 MB, 1010826752 bytes 255 heads, 63 sectors/track, 122 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x91f72d24 Device Boot Start End Blocks Id System /dev/sda1 1 9 72261 82 Linux swap / Solaris /dev/sda2 10 26 136552+ 83 Linux /dev/sda3 27 122 771120 83 Linux |
|
Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks. |
|
# mkswap /dev/sda1 # mkfs.ext3 -L RootFS /dev/sda2 # mkfs.ext3 -L MyData /dev/sda3 |
|
config global automount option from_fstab 1 option anon_mount 1 config global autoswap option from_fstab 1 option anon_swap 0 config mount option target / option device /dev/sda2 option fstype ext3 option options rw,sync option enabled 1 option is_rootfs 1 config mount option target /home option device /dev/sda3 option fstype ext3 option options rw,sync option enabled 1 config swap option device /dev/sda1 option enabled 1 |
|
root@OpenWrt:/# df -h Filesystem Size Used Available Use% Mounted on /dev/root 1.9M 1.9M 0 100% /rom tmpfs 14.5M 40.0K 14.5M 0% /tmp tmpfs 512.0K 0 512.0K 0% /dev /dev/sda2 129.1M 11.8M 110.7M 10% /overlay mini_fo:/overlay 1.9M 1.9M 0 100% / /dev/sda3 741.2M 16.8M 686.8M 2% /home root@OpenWrt:/# free total used free shared buffers Mem: 29732 15476 14256 0 1540 Swap: 72256 0 72256 Total: 101988 15476 86512 |
| $ opkg update — обновить список доступных пакетов $ opkg install — устновить пакеты |
| src/gz localpackages ftp://(адрес сервера) |
|
root@OpenWrt:/# opkg update Downloading ftp://ftp:ftp@192.168.1.9/Packages.gz. Inflating ftp://ftp:ftp@192.168.1.9/Packages.gz. Updated list of available packages in /var/opkg-lists/localpackages |
| root@OpenWrt:/# opkg install имя пакета |
Получаем последнюю версию OpenWrt:
$ svn co svn://svn.openwrt.org/openwrt/trunk/
Получаем дополнительные пакеты:
$ ./scripts/feeds update -a && ./scripts/feeds install -a
Применяем дефолтную конфигурацию:
$ make defconfig
Конфигурируем систему (выбираем свой тип роутера):
$ make menuconfig
Готовый файл прошивки для заливки в роутер находится здесь: /bin/brcm47xx$
Если нужно просто обновить ранее скачанный дистрибутив, то обновляем до последней версии с помощью команды:
$svn up
Также возможно получение исходников определеной версии:
$svn co -r 27495 svn://svn.openwrt.org/openwrt/trunk/
Для сборки какого-то отдельного (определенного) пакета из состава openWrt:
make package/busybox/install
